XL350 Honda bikes and parts "SELLOUT" (1 viewing) (1) Guest
Favoured: 0
|
|
|
TOPIC: XL350 Honda bikes and parts "SELLOUT"
|
|
|
|
XL350 Honda bikes and parts "SELLOUT" 4 Weeks, 1 Day ago
|
|
Bike 1 is the #15
This bike is new from the ground up. Complete Pat Orman bike. Champion frame that has been sand blasted and painted. All busings and beaarings have been replaced. The motor has been completely rebuilt from the ground up by Pat. Its a 442 side port big bore that has an Edco head and Webster gears. New rod, bearings, seals piston and rings, new valves, rockers, guides, and new Orman CDI unit.It has a 38 mikuni with a Jemco pipe and megacycle cam. The Championtank has been coated with Caswell. The tail section and tank have been custom painted.
On the front end are 35mm Betors wth brand new Weiss triple clamps, with Afam bars. The rear shocks are Works Performance. It also comes with a new "Tell Tale Tach."
The wheels have had new bearings installed with a brand new brake rotor and pads. Brakes are Grimecas, tires are Maxis with 3 races on them. It has 3 heationg cycles on it and is NOT broken in yet. 1st gear has been removed.
This bike was completely assembled and built by Pat Orman. I have $10,000 invested in this bike. Im asking $7000
Bike 2 is #14
This is a 442 side port big bore that is completely new from the ground up. Engine has a ported head with a new megacycle roller bearing cam. It has a new rod, bearings, seals, piston and rings, cylinder, rockers, valves, guides, cam chain, tensioner. It comes with a 38 Mikuni and brand New Jemco pipe plus a new Orman CDI ignition.
It has a new tail section and the tank and tail have a fresh paint job. The frame is an Astro that handles great. It has brand new Works Performace shocks, grimeca brakes, betor forks, Weiss 35mm tripl clamps and new Vortex bars.
The bike is completely fresh and race ready, it has been started but is not broken in yet. 1st gear has been removed. I have $7000 invested in this one and Im asking $5000.
Spare motor and Parts
1-complete running race ready stock XL 350 center port motor with a 36mm mikuni carb plus k&n filter and throttle cable
1-3 race old 442 cylinder ith piston and rings ported side port had with new valves and R&D springs
1-remote starter receiver with o ring and cover
4-stock cylinders
2-412 cylinders
5-stock side port heads and 1 ported side port head
3-center port heads
2sets of center cases
7-right side covers
2-mag covers
2-extra pipes
3-clutch cables
2-new throttle cables
1 new set of Barnett clutch springs
4-slightly used valves with R&D springs
11-valve covers
3-flywheels
6-rocker covers
1- spare Orman Crank Ignition
1-New 82mm piston/rings
9-clutch baskets ith cutch plates
4-stock cams
1-Megacycle 12790b race cam
1-megacycle roller bearing cam
2-sets of misc O rings
3-sets of misc gaskets kits
5-sets cam chain tensioners
5-356 rockers
2-intake manifolds
10-counter sprockets from 12 to 16 tooth
2-sets of misc transmission parts cogs gears etc
1-Knight tail section
I want $7000 for bike1, $5000 for bike2 and $2000 for all the spare parts or I will sell the whole package for $12000. Contact Rich Long @330 3236480 cell or 330 8333425 home or email me at hotshoe001yahoo.com More pics are available upon request
I have alot of additional pictures email me.
 
' />
' />
' />
' />
' />
' />
' />
|
|
|
|
|
|
|
Last Edit: 2009/10/24 06:54 By R.Long14.
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re:XL350 Honda bikes and parts "SELLOUT" 3 Weeks, 6 Days ago
|
|
|
|
|
|
|
|
|
|
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re:XL350 Honda bikes and parts "SELLOUT" 3 Weeks, 3 Days ago
|
|
|
The spare motor and all the parts are sold. Both 442 XLs are still for sale though. Thanks Rich
|
|
|
|
|
|
|
The administrator has disabled public write access.
|
|
|
|
Re:XL350 Honda bikes and parts "SELLOUT" 2 Weeks, 4 Days ago
|
|
|
Will deal some.
|
|
|
|
|
|
|
The administrator has disabled public write access.
|
|
|
|
|
